Product Details
You can access detailed product features by scrolling the page
Product Code
41636233119540860532785352579_146
Tasarım: Gaea Creative Studio
Content:
They are removed one by one and glued. The spaces between the strips are empty. The color of your wall appears from the back.
The rainbow is 75 cm wide and 45 cm high.
There are 130 points. It is ideal for 4 m2.
Attention: It adheres more difficultly to a rough surface.
* The surfaces to which the material will be applied should be thoroughly cleaned, should not contain any dirt, dust, oil, or any contamination that could affect the adhesion of the material. If there is no visible dirt or similar factor on the surface to be applied, definitely wipe it with a damp cloth to purge possible dust.
* Make sure the surface is completely dry before applying the application.
* During the application, make sure that there is no air bubble left under the material.
* Ensure that all of the material is spread on the surface and that there is no lack of contact at the edges.
* Please be careful not to contact the adhesive surface too much while removing the protective paper of the material and during the application to avoid reducing adhesiveness.
* Newly painted surfaces should be dried for at least three weeks.
Design: Gaea Creative Studio
Content:
They are individually taken out and stuck on. The gaps between the strips are empty. The color of your wall appears from behind.
The rainbow is 75 cm wide and 45 cm high.
There are 130 points. It is ideal for 4 m2.
Attention: It adheres more difficultly to a rough surface.
* The surfaces where the material will be applied should be thoroughly cleaned, should not contain any dirt, dust, oil or any impurities that may affect the adhesion of the material. If there are no visible dirt, etc. factors on the surface to be applied, definitely clean it with a damp cloth to remove possible dust.
* Make sure the surface is completely dry before applying the application.
* Make sure no air bubbles remain under the material during the application.
* Make sure that all of the material is plastered to the surface and there is no non-contact at the edges.
* Be careful not to touch the adhesive surface too much while removing the protective paper of the material and during the application, in order not to reduce its adhesiveness.
* Newly painted surfaces must have been dried for at least three weeks.
